Filter
Top Products
Chapter 3 Setting the Time Code
Chapter 3 Setting the Time Code 43 (GB)
3 Press the J/j buttons to select TC PRESET, then
press the EXEC button.
The following menu appears.
TC ⁄ UB SET
TC PRESET
UB PRESET
DV IN TC
TC MAKE
TC RUN
TC FORMAT
RETURN
TC
CM
DISP
V
A
VTR
ETC
00:00:00:00
RESET
PRESET
RETURN
4 Press the J/j buttons to select PRESET, then
press the EXEC button.
The following menu appears.
TC ⁄ UB SET
TC PRESET
UB PRESET
DV IN TC
TC MAKE
TC RUN
TC FORMAT
RETURN
TC
CM
DISP
V
A
VTR
ETC
OOOO
00:00:00:00
oooo
SET
CANCEL
5 Set the first two digits. Press the J/j buttons to
select the number, then press the EXEC button.
6 Repeat step 5 to set the other digits.
7 Press the J/j buttons to select SET, then press the
EXEC button.
The initial time code value is set and the menu
display returns to that of step 2.
8 Press the J/j buttons to select RETURN, then
press the EXEC button.
The menu display returns to that of step 1.
To cancel the time code setting
Select CANCEL in step 7, then press the EXEC
button.
To reset the time code
Select RESET in step 4, then press the EXEC button.
To set the value of the user bits
You can set the user bits as eight-digit hexadecimal
values (base 16) to have the date, time, scene number,
and other information inserted into the time code track.
Note
The user bits can be set only in a DVCAM format
recording. They cannot be set in a DV format
recording.
1 Display the menu on the monitor.
For details on displaying the menu, see “Operating the
Menus” on page 54 (GB).
TC ⁄ UB SET
TC PRESET
UB PRESET
DV IN TC
TC MAKE
TC RUN
TC FORMAT
TC
CM
DISP
V
A
VTR
ETC
2 Press the J/j buttons to select TC/UB SET, then
press the EXEC button.
The following menu appears.
TC ⁄ UB SET
TC PRESET
UB PRESET
DV IN TC
TC MAKE
TC RUN
TC FORMAT
RETURN
TC
CM
DISP
V
A
VTR
ETC
00:00:00:00
3 Press the J/j buttons to select UB PRESET, then
press the EXEC button.
The following menu appears.
TC ⁄ UB SET
TC PRESET
UB PRESET
DV IN TC
TC MAKE
TC RUN
TC FORMAT
RETURN
TC
CM
DISP
V
A
VTR
ETC
00 00 00 00
RESET
PRESET
RETURN
(Continued)