Filter
Top Products
Chapter 3 Editing
Chapter 3 Editing 49
Finding Edit Points —Search
Playback in search mode using the jog and shuttle dials allows finding edit
points quickly.
Jog mode
Playback speed is determined by the rotation speed of the jog dial between
±1 times normal speed. Rotate the dial in the clockwise direction to search
in the forward direction, and rotate the dial in the counterclockwise
direction to search in the reverse direction.
Shuttle mode
Playback speed is determined by the rotation angle of the shuttle dial
between ±32 times normal speed (21 steps). Click points allow playback
at ±5 times normal speed.
Rotate the dial in the clockwise direction to search in the forward
direction, and rotate the dial in the counterclockwise direction to search in
the reverse direction.
Switching between each mode
Lighting the JOG or SHUTTLE indicator shows the corresponding mode
is selected.
Switching from jog to shuttle mode
Rotate the shuttle dial.
Switching from shuttle to jog mode
Press the jog dial or rotate the jog dial while setting the shuttle dial at still
position.
To switch between normal playback and search modes
Press the PLAY and search buttons alternately.
As factory default setting, rotating the jog or shuttle dial switches to search
mode at any time except during recording and editing.
If you change the setting of setup menu item 101, the above function will
be disabled and switching to search mode will be possible only when the
search button is pressed.
For details about setting, see item 101 on page 106.