Filter
Top Products
28-EN
Erasing a track mark
(TRACK MARK OFF)
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows.
1 While playing the track with the track
mark you want to erase, press P to
pause.
2 Find the track mark by pressing =
lightly.
For example, to erase the third track
mark, find the beginning of the third
track. “00:00” appears in the display.
3 Press TRACK MARK on the station.
”Rehearsal” will light up and ”Track
Mark OFF OK? n Push Enter” will
appear. A four second segment will
be played repeatedly.
To cancel erasing, press p.
4 Press TITLE/ENTER.
”Track Mark OFF” will be displayed.
The track mark is erased and the two
tracks are combined. The number of
the newly combined track will be that
of the first track. The succeeding
tracks will be renumbered.
To erase a track mark on the
recorder
Press = or + during pause to find the
track mark you want to erase. Press T
MARK.
Note
When erasing a track mark with the
recorder, the mark will be erased where you
pressed the T MARK button. There will be
no repeated play.
z
When you erase a track mark, the date, time,
and name assigned to the mark are also
erased.
1234
4
123
Track numbers decrease
.
Erase a track mark
=
TRACK
MARK
P
TITLE/
ENTER