40-EN
If you have any questions or problems
concerning your recorder, please consult
your nearest Sony dealer.
Note on digital recording
This recorder uses the Serial Copy
Management System, which allows only
first-generation digital copies to be made
from premastered software. You can only
make copies from a home-recorded MD
by using the analog (line out) connections.
CD player, MD
player, etc.
Digital recording
Home-
recorded
MD
Recordable
MD
No
digital
recording
Back of the MD
Record-protect
Tab
For the customers in Europe
When disposing of the station
The station holds two nickel cadmium
batteries inside, used to power the
recording/playback timer. When
disposing of the station unit, be sure to
remove the internal batteries following
the steps shown below, and dispose of
them properly, such as by recycling them.
To protect a recorded MD
To record-protect an MD, slide open the
tab at the side of the MD. In this position,
the MD cannot be recorded. To record
again, slide the tab back so the tab is
visible.
1
2
1 Unplug the AC power adaptor.
2 Pull out the REC LEVEL control
knob.
3 Unscrew 6 screws at the rear of the
unit and disassemble the cabinet.
4 Remove the batteries with a minus
driver, etc.
Notes
•Never disassemble the station unit except
for disposing of the unit.
•Do not short-circuit the plus and minus
terminals of the removed batteries.