57-EN
Card remote commander
1 Number keys
2 ( (play) button (20)
3 = (rewind/AMS) button (20)
4 + (fast forward/AMS) button (20)
5 P (pause) button (20)
6 p (stop) button (20)
7 Transmitter
Direct it toward the remote sensor on
the station.
8 POWER button (20)
9 PLAY MODE button (22)
!º ACTIVE SP (active speaker) LEVEL
+/– buttons (20)
!¡ Battery compartment
1 2 3
4 5 6
7 8 9
>
10 0/10
= ( +
P p
PLAY MODE
POWER
ACTIVE SP
LEVEL
81
9
!º
7
2
3
4
5
6
!¡
Using the remote commander
•You may not be able to use the remote
commander when the remote sensor on the
station is exposed to direct sunlight or
strong illumination. The effective range of
the remote commander is appoximately 5
meters.
•Other Sony audio products may respond to
the remote commander supplied with this
unit. In this case, place other products
away from the station. If you choose to use
them near each other and want to block the
effect of the remote commander on either
one, cover the remote sensor on the product
with adhesive tape, etc.
Replacing the lithium battery
When the battery becomes weak, the range
of the remote commander becomes shorter.
Replace the battery with a new CR2025
lithium battery (not supplied).
1Insert a pointed object to the slot. Slide and
hold it as shown below.
2Pull out the battery tray.
3Insert a CR2025 lithium battery (not
supplied) with the (+) side facing up.
Insert with correct polarity, or the remote
commander will not work.