Filter
Top Products
32-EN
zOther useful functions
Locking the controls
(HOLD)
To prevent the buttons from being
accidentally operated when you carry the
recorder, use this function.
1 Slide HOLD in the direction of the
c.
On the recorder, slide HOLD to lock
the controls of the recorder. On the
remote control, slide HOLD to lock
the controls of the remote control.
Slide HOLD in the opposite direction
of the arrow to unlock the controls.
z
The HOLD function on the recorder is
disabled while it is attached to the station.
The HOLD function on the remote control is
unaffected.
HOLD
HOLD
to audio-
timer
Recording/playing with
a timer
Start recording or playback at a preset
time using an audio-timer (optional).
TIMER
1 Plug in the AC power adaptor of the
station to the audio-timer (optional).
2 Adjust recording level manually and
press p if recording through analog
input (steps 4 to 6 of ”Recording
through analog input”, page 16).
3 Set TIMER to ”REC” or ”PLAY”.
To start recording at the preset time:
select ”REC”. Recording will start
automatically after the part that is
already recorded in the MD.
To start playback at the preset time:
select ”PLAY”.
4 Set the time on the audio-timer and
turn the power off.
The audio-timer will turn on
automatically at the preset time,
which will then turn on the station.