Filter
Top Products
106
You can play the contents of the connected
USB device in the order you want by
arranging the order of the tracks on the
connected USB device to create your own
programme. You can make a programme of
up to 24 tracks.
1 Press , while the “Music Jukebox
(USB)” is displayed.
2 Select “Play Mode” using M/m, and
press ENTER.
The “Play Mode” menu appears.
3 Select “Programme,” and press
ENTER.
4 Select “Input/Edit Programme,” and
press ENTER.
5 Select an album (example: Album 01)
using M/m, and press ,.
6 Select a track (example: Track 001)
using M/m, and press ENTER.
The track is programmed.
If you make a mistake, select the step
number (example: 01.) using </M/m,
and press CLEAR.
7 To programme other tracks, press
</M/m/, to select a step number,
and repeat steps 5 and 6.
8 Press H.
Programme play starts.
To stop Programme play
Press x (stop).
To cancel Programme play
Set “Programme” to “Cancel Programme
Play” in the “Play Mode” menu during
playback.
To erase the programme
Set “Programme” to “Erase Programme
List” in the “Play Mode” menu.
z Hints
• The programme you made remains after
Programme play finishes. To play the same
programme again, set “Programme” to “Start
Programme Play” in the “Play Mode” menu.
However, the programme is cleared after you
press [/1.
• You can repeat Programme play. During
Programme play, set “Repeat” to “Repeat
Programme” in the “Play Mode” menu
(page 105).
Creating your own programme
(Programme) (USB device only)