Filter
Top Products
134
b Note
If the HDMI OUT jack is connected to equipment
not compatible with MPEG audio signals, the
PCM signals will be automatically output even
when you select “MPEG.”
Selects the dynamic range (difference
between soft and loud sounds) setting when
playing a DVD that conforms to “Audio
DRC.” This affects the output from the
following jacks:
– LINE 2 OUT R-AUDIO-L jacks
– LINE 3 – TV jack
– LINE 1/DECODER jack
– DIGITAL OUT (COAXIAL)/HDMI OUT
jack only when “Dolby Digital Output” is
set to “Dolby Digital -> PCM” (page 133).
Language Settings
(Language)
You can make language settings.
Switches the display language on the screen.
Switches the language of the sound track.
Switches the language of the subtitles
recorded on the disc.
The “Auto Language” function is available
when “Audio Language” and “Subtitle
Language” are set to the same language, and
“Subtitle Display” is set to “On.”
Audio DRC (Dynamic Range
Control) (DVDs only)
On Makes low sounds clear
even if you turn the volume
down.
Off
Normally select this
position.
OSD Language
Audio Language (DVD VIDEO
only)
Subtitle Language (DVD VIDEO
only)
Auto Language
On For DVD VIDEOs whose
main audio track is the
language you set in “Audio
Language” and “Subtitle
Language,” the recorder
plays the main audio track
without subtitles.
For DVD VIDEOs whose
main audio track is not the
language you set in “Audio
Language” and “Subtitle
Language,” the recorder
plays the main audio track
with subtitles in the
language you set.
Off Turns off the function.