Sony RDR-HXD890 DVD Recorder User Manual


 
64
Making Changes to the
GUIDE Plus+ System
You can customize the GUIDE Plus+
system. If the host channel has been changed
or moved, and the programme guide data
cannot be received, you can resolve the
problem by following the steps below.
The default host channel setting is set to
“Automatic,” so you should not have to
change the host channel setting. However, if
the host channel has changed or moved,
update the host channel setting.
If the set top box receiver is connected to the
recorder using a SCART cord only
(page 20), see “Changing the GUIDE Plus+
host channel manually (Setup)” on page 64.
1 Press GUIDE.
2 Press M to move the cursor to the
Menu Bar.
3 Select “Setup” using </,.
The GUIDE Plus+ setup menu appears.
4 Select “Host Channel Setup” using
M/m, and press ENTER.
5 Press the yellow button (“Reset”).
6 Press [/1 to turn off the recorder.
7 Wait for one day until the programme
guide data can be received.
If the programme guide data has not
been received after waiting for a day,
search for the host channel at the
following website and set the host
channel manually (“Changing the
GUIDE Plus+ host channel manually
(Setup)” (page 64)).
www.europe.guideplus.com
If the set top box receiver is connected to the
recorder using a SCART cord only and you
want to receive the programme guide data
from your set top box receiver, search for the
host channel on the following website and
set it for your area, following the steps
below:
www.europe.guideplus.com
1 After step 4 of “Searching for the
GUIDE Plus+ host channel (Setup),”
press the yellow button (“Change”)
twice.
“Manual” appears.
2 Select “Source” using ,.
3 Press the yellow button (“Source”)
repeatedly to select the input source.
4 Select “Prog. No.” using ,.
5 Enter the programme position
number using the number buttons.
6 Press the green button (“Save”).
The display asks for confirmation.
Searching for the GUIDE Plus+
host channel (Setup)
“Setup”
Changing the GUIDE Plus+ host
channel manually (Setup)