Filter
Top Products
59
Recording (For Freeview)
Checking/Changing/
Cancelling Timer
Settings (Timer List)
You can check, change, or cancel the timer
settings using the Timer List.
b Note
(Models for the UK only) To change the EPG
timer settings, set “EPG Link” to “Off” in “Set
Details.”
1 Press TIMER.
The “Timer List” display appears.
When all of the timer settings are not
visible on the display, press M/m to view
the hidden timer settings.
2 Select the timer setting you want to
check/change/cancel, and press ,.
The sub-menu appears.
3 Select an option, and press ENTER.
“Modify”:
Changes the timer setting.
Select an item using </, and adjust
using M/m. Select “OK” and press
ENTER.
“Erase”:
Erases the timer setting.
Select “Yes” and press ENTER.
“Skip Once”:
Cancels the daily or weekly recordings
only once. After cancelling the timer
setting, “Skip Once” appears next to the
timer setting in the Timer List.
“Alternate Search” (models for the UK
only) (page 56)
“Series Search” (models for the UK
only) (page 56)
“Recommendation Search” (models for
the UK only) (page 56)
To change or cancel the setting, repeat
steps 2 and 3 above.
When the timer settings overlap
• The programme that starts first has priority
and the entire programme is recorded.
• After finishing the previous recording, the
other recording starts with several tens-of-
second’s delay (when the end-time of one
recording and the start-time of another are
the same).
• When the recordings start at the same time,
only one of them will be recorded. Cancel
the timer setting for the programme that
you are not going to record.
z Hints
• For manual timer settings, you cannot modify
the timer setting for the current recording, but
you can extend the duration of the recording time
while recording (page 57).
For timer settings using the EPG, you can
modify the timer setting for the current recording
while recording, but you cannot extend the
duration of the recording (even when recording
is stopped).
(Models for the UK only) For timer settings
using the EPG, you can modify the timer setting
for the current recording while recording, and
extend the duration of the recording only when
“EPG Link” is set to “Off.”
• You can move to the first row/bottom row of the
Timer List using ./> while the list is
displayed.
b Notes
• When “VPS/PDC” is set to “On” for one or more
timer recordings, the start times may change in
the event of a broadcast delay or early start.
• Even if the timer is set, timer recordings cannot
be made while recording a programme that has
priority.
+
RW
-
RWVR
-
RW
Video
-
RVR
+
R
HDD
-
R
Video