Filter
Top Products
34
Labelling and Protecting a
Disc
Labelling a disc
A disc is automatically labelled as its disc type.
You can change the disc name (up to 21 characters).
1 Insert a disc.
2 Press SET UP to turn on the Setup Display.
3 Select [Disc Info] and press ,.
4 Select [Disc Name] and press ,.
5 While [Edit] is selected, press ENTER.
The display for entering characters appears.
To enter characters, see page 32.
Note
Label the disc before you finalize it. Once a disc is
finalized, you cannot change the disc name.
Protecting a Disc
You can protect all titles on the disc to prevent
accidental recording, editing, or erasing.
1 Insert a disc.
2 Press SET UP to turn on the Setup Display.
3 Select [Disc Info] and press ,.
4 Select [Protect] and press ,.
5 Select [On] and press ENTER.
To cancel the protection
Repeat the steps above, and select [Off] and press
ENTER in step 5.
z Hint
For DVD+RWs and DVD+Rs, you can set protection for
individual titles (page 62).
1 2 3
4 5 6
7 8 9
0
</M/m/,,
ENTER
SET UP
+
RW
-
RWVR
-
RW
Video
-
R
+
R
Format DVD
Disc Info
Finalize
Disc Name
Protect
Edit
-
RWVR
+
RW
+
R
Format DVD
Disc Info
Finalize
Disc Name
Protect
Off
On