Filter
Top Products
41
Recording
4 Press , to move to [Repeat], and press
M/m to select a repeat option.
You can select [Today], [Mon-Fri], or
[Weekly].
5 Press ENTER.
The programme position, date, start and stop
times, recording mode, repeat option, and
PDC/VPS setting (page 39) appear.
Press </, to select an item and press M/m
to change the setting, if necessary.
6 Press ENTER.
The Timer List appears with the timer setting
you made.
To make another timer setting, press TIMER
to return to the [ShowView] menu and repeat
from step 3 to 6.
7 Press O RETURN to turn off the Timer
List.
8 Press '/1 to set your recorder to standby
mode.
The TIMER REC indicator lights up on the
front panel and the recorder is ready to start
recording.
To stop recording during timer recording
Press x. Note that it may take a few seconds for
the recorder to stop recording.
If the timer settings overlap
If the timer settings overlap, [Dup. Date] will
appear in the Timer List. For details, see “When
the timer settings overlap” (page 42).
To confirm, change, or cancel timer recording
See “Checking/Changing/Cancelling Timer
Settings (Timer List)” (page 42).
z Hints
• The Rec Mode Adjust function also works with this
timer method (page 40).
• You can use the recorder after setting the timer. Just
press '/1 to turn on the recorder. Press '/1 again to
set the recorder to standby mode before the timer
recording starts.
Notes
• Check that the clock is correctly set before setting the
timer recording. If not, the timer recording cannot be
made.
• The recorder must be in standby mode for the timer
recording to be made.
• Even if the timer is set for the same daily or weekly
programme, the timer recording cannot be made if it
overlaps with a programme that has priority. [Dup.
Date] will appear for the overlapped setting in the
Timer List. Check the priority order of the settings
(page 42).
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has priority.
• The beginning of some recordings may not be made
when using the PDC/VPS function.
• If the TIMER REC indicator flashes on the front panel,
check that a recordable disc is inserted correctly and
available recording time on the disc is enough.
100 Min Free
19:2012/4 Tue
12
PR Date Start Stop Mode Repeat PDC/VPS
Timer Standard
19:50 TodaySP Off
SP
12/4 Tue
Date
12
PR
Timer List
19:20
Start
30
Length
SP
Mode
Rec. OK
Check
: PDC/VPS