Filter
Top Products
81
Additional Information
The recorder starts playing the disc
automatically.
, The DVD VIDEO features an auto playback
function.
Playback stops automatically.
, If the disc has an auto pause signal, the recorder
stops playback at the auto pause signal.
Some functions such as Stop, Search, or Slow-
motion Play cannot be performed.
, Depending on the disc, you may not be able to do
some of the operations above. See the
instructions supplied with the disc.
The language for the sound track cannot be
changed.
, Multilingual tracks are not recorded on the disc
being played.
, The DVD VIDEO prohibits the changing of the
language for the sound track.
, Try changing the language using the DVD
VIDEO’s menu.
The subtitle language cannot be changed or
turned off.
, Multilingual subtitles are not recorded on the
DVD VIDEO.
, The DVD VIDEO prohibits changing of the
subtitles.
, Try changing the subtitle using the DVD
VIDEO’s menu.
, The subtitles cannot be changed for the titles
recorded on this recorder.
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO being played.
, You are trying to change the angles when “ ”
does not appear in the front panel display
(page 49).
, The DVD VIDEO prohibits changing angles.
, Try changing the angle using the DVD VIDEO’s
menu.
, The angles cannot be changed for the titles
recorded on this recorder.
The MP3 audio tracks or JPEG image files do
not play.
, The MP3 audio tracks or JPEG image files are
not recorded in a format that the recorder can
play (page 10).
Recording/Timer recording/Editing
The programme position cannot be changed
from the channel you are recording.
, Set the TV’s input source to “TV.”
Recording does not start immediately after you
press z REC.
, Operate the recorder only after “LOADING,”
“INITIALIZE,” or “WRITE DISC” disappears
from the front panel display.
Nothing was recorded even though you set the
timer setting correctly.
, The recorder was turned on when the timer
recording start time came. Set the recorder to
standby mode before timer recording starts.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to a
power failure. Reset the clock (page 72).
, The channel was disabled after the timer
recording was set. See [Channel Settings] on
page 70.
, Disconnect the mains lead from the mains, and
connect it again.
, The programme contains copy protection signals
that restrict copying.
, Other timer setting overlapped the timer setting
(page 42).
, There is no recordable disc inserted in the
recorder.
, There is not enough disc space for the recording.
, The disc is protected (DVD+RW, DVD-RW,
DVD+R) (page 34).
, The recorder was in the process of DV Dubbing
(page 66).
Recording does not stop immediately after you
press x.
, It will take a few seconds for the recorder to input
disc data before recording can stop.
Timer recording is not complete or did not start
from the beginning.
, There was a power failure before or during
recording. Reset the clock (page 72).
,continued