31
Eight Basic Operations — Getting to Know Your DVD Recorder
6. Labelling and
Protecting a Disc
You can execute options effective for the
entire disc using the “Disc Information”
display.
1 Insert a disc.
See “1. Inserting a Disc” on page 23.
2 Press OPTIONS to select “Disc
Information,” and press ENTER.
The “Disc Information” display appears.
Available settings differ depending on
the disc type.
Example: When the inserted disc is a
DVD+RW.
3 Select “Disc Name,” and press
ENTER.
Enter the disc name in the “Input Disc
Name” display (page 29).
b Note
You can enter up to 64 characters for a DVD’s disc
name. The disc name may not appear when the disc
is played on other DVD equipment.
1 Insert a disc.
See “1. Inserting a Disc” on page 23.
2 Press OPTIONS to select “Disc
Information,” and press ENTER.
The “Disc Information” display appears.
Available settings differ depending on
the disc type.
Example: When the inserted disc is a
DVD-RW (VR mode).
A “On”/“Off”: Indicates whether
protection is set (DVD-RW/DVD-
R in VR mode only)
B “Protect Disc”
3 Select “Protect Disc,” and press
ENTER.
4 Select “Protect,” and press ENTER.
To cancel the protection
Select “Unprotected” in step 4.
z Hint
You can set protection for individual titles
(page 66).
Labelling a disc
OPTIONS
</M/m/,,
ENTER
+
RW
-
RWVR
-
RW
Video
-
RVR
+
R
-
R
Video
Protecting a disc
-
RWVR
-
RVR