Filter
Top Products
95
Additional Information
The MP3 audio tracks do not play.
, The MP3 audio tracks are not recorded in a
format that the recorder can play (page 61).
The JPEG image files do not play.
, The JPEG image files are not recorded in a
format that the recorder can play (page 61).
, Progressive JPEG images cannot be played.
The programme position cannot be
changed from the programme position you
are recording.
, Set the TV’s input source to “TV.”
Recording does not start immediately
after you press z REC.
, Operate the recorder only after “LOAD,”
“FORMAT,” or “INFOWRITE” disappears
from the front panel display.
Nothing was recorded even though you set
the timer setting correctly.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to
a power failure that lasted for more than 1
hour. Reset the clock (page 77).
, Disconnect the mains lead from the mains,
and connect it again.
, The programme contains copy protection
signals that restrict copying.
, Other timer setting overlapped the timer
setting (page 52).
, There is no DVD inside the recorder.
, There is not enough disc space for the
recording.
, The recorder was in the process of DV
Dubbing.
, A scrambled channel is selected.
, The Channel activated Parental Lock is
selected (page 78).
Recording does not stop immediately
after you press x REC STOP.
, It will take a few seconds for the recorder to
input disc data before recording can stop.
Recording does not stop after you press
x.
, Press x REC STOP.
Timer recording is not complete or did not
start from the beginning.
, There was a power failure during recording.
If the power recovers when there is a timer
recording, the recorder resumes recording.
Should the power failure continue for more
than 1 hour, reset the clock (page 77).
, Other timer setting overlapped the timer
setting (page 52).
, Disc space was not enough.
Contents previously recorded were
erased.
, Data that is not playable on this recorder but
was recorded on a DVD with a PC will be
erased from the disc when the disc is
inserted.
Nothing was recorded even though you set
the Synchro-Rec setting correctly.
, You forgot to turn off the connected
equipment. Turn off the connected
equipment and set the recorder to Synchro-
Rec standby mode (page 53).
, The recorder was not set to the Synchro-
Recording standby mode. Press
c z SYNCHRO REC to have the recorder
stand by for recording. Make sure the
SYNCHRO REC indicator lights up on the
front panel (page 53).
, The equipment is not connected to the LINE
3 jack of the recorder.
, The recorder is connected to the TV output
jack of the connected equipment.
Recording/Timer recording/
Editing
Recording from the equipment
with a timer
,continued