Filter
Top Products
12
GB
1 While pressing COMMANDER
OFF, press %.
All the component names on the
display flash.
2 Press the Component Select
button for the desired component.
3 Press PROGRAM + or
PROGRAM –.
Press PROGRAM + to go to the next
code number.
Press PROGRAM – to go back to the
previous code number.
Setting the Code for Preset Audio
and Visual Components
(continued)
4 Aim the Commander at the
component and press the 1 key.
When the remote control signal is
sent, is displayed on the display.
If it successfully works (power-off for
TV, power-on for VCR, DVD, SAT,
CBL, AMP, and playback for VD, CD,
MD, TAPE), go to Step 5.
If it doesn’t, repeat Steps 3 and 4.
5 Press the ENTER key.
A beep sounds, and the code number
and “ENTER” appear twice.
Note
It is recommended to write down the code
number.
6 Press COMMANDER OFF.