Filter
Top Products
28
GB
Programming a series of
commands to the Component
Select buttons
As with the SYSTEM CONTROL buttons,
you can also programme a series of
operating commands for the Component
Select buttons (up to 16 steps).
To execute the commands programmed
on a Component Select button by the
System Control function, press the button
for more than 2 seconds.
Notes
•The programmed commands are executed
when you press a Component Select button
for more than 2 seconds. When you press the
button for less than 2 seconds, it works as
the normal Component Select button, and the
corresponding touch-keys are displayed.
•See also “Tips for programming the System
Control functions” on page 25 and “Notes on
System Control Operations” on page 27.
Example: To programme the
procedure on page 23 for the
VCR3 button
1 While pressing COMMANDER
OFF, press 2 + and VCR3.
“VCR3” stays lit, and the other
component names flash.
If a series of commands is already
programmed for that button
The programmed operations are displayed
in order. To programme a new series of
operations, clear the programme first (page
29).
2 Follow Steps 2 to 5 on pages 24
and 25.
Executing a Series of Commands
— System Control Functions
(continued)