Filter
Top Products
51
GB
1 While pressing COMMANDER
OFF, press PROGRAM + and the
Component Select button whose
display you want to modify.
2 Press the key you want to display.
Each time the key is pressed, it is
selected and deleted alternately.
A selected key stops flashing and
stays lit.
3 Repeat Step 2 until all necessary
keys are set.
4 Press COMMANDER OFF.
Note
For components that have few keys on the full-
function display, the basic-function display can
be the same as the full one. In this case, you
cannot modify the basic-function display.
To clear the settings on the basic-
function display
1 While pressing COMMANDER
OFF, press PROGRAM + and a
Component Select button.
2 While pressing the CHANGE key,
press the Component Select
button again.
3 Press COMMANDER OFF.
Note
If you clear the settings on the basic-function
display using the procedure above, the display
returns to its original key settings. It doesn’t
clear the learned signals from keys.