Filter
Top Products
OSIM | Project: EG2L | Resolution-Width: 960 | Resolution-Height: 540 | Language: English
111/ 138 | File AQUA_Paprika_OSIM_GBAEP_090807.fm | Created at March 19, 2008 | Modified at September 29, 2009 10:07 am
Previous Next Table of Contents
Select Back
<auto-generated>Set-up
[H]
• This function may have some restrictions
depending on the input displayed.
HDMI Set-up
Allows the TV to communicate with equipment
that is compatible with the Control for HDMI
function, and connected to the HDMI sockets/
jacks of the TV. Note that communication
settings must also be made on the connected
equipment.
• Control for HDMI: Sets whether or not to link
the operations of the TV and the connected
equipment that is compatible with Control for
HDMI. When set to “On”, the following
functions are available.
If the specific Sony equipment that is
compatible with Control for HDMI is connected,
this setting is applied to the connected
equipment automatically when the “Control for
HDMI” is set to “On” using the TV.
• Auto Devices Off: When this is set to “On”, the
connected equipment that is compatible with
Control for HDMI turns off when you turn off
the TV.
• Auto TV On: When this is set to “On”, the TV
turns on when you turn on the connected
equipment that is compatible with Control for
HDMI.
• Tuner Box Control: If set to “Advanced”, you
can select a channel tuned by connected
equipment using the TV’s remote.