Filter
Top Products
OSIM | Project: EG2L | Resolution-Width: 960 | Resolution-Height: 540 | Language: English
116/ 138 | File AQUA_Paprika_OSIM_GBAEP_090807.fm | Created at March 19, 2008 | Modified at September 29, 2009 10:07 am
Previous Next Table of Contents
Select Back
<auto-generated>Analogue Set-up
4 Press to exit the labeling procedure.
Intelligent Picture
• On with Indicator: Automatically reduces the
picture noise. The signal level bar is displayed
when the channel is changed or the display is
changed from an input screen to a TV
programme.
• On: Automatically reduces the picture noise.
• Off: Turns off the “Intelligent Picture” feature.
Manual Programme Preset
To preset a channel, press PROG +/– to select
the programme number, before selecting
“Label”, “AFT”, “Audio Filter”, “Skip”, “Decoder”,
or “LNA”. You cannot select a programme
number that is set to “Skip” (118).
• Programme/System/Channel: Allows you to
preset programme channels manually.
1 Press to select “Programme”, then press
.
2 Press to select the programme number
you want to manually tune (if tuning a VCR,
select channel 00), then press .
3 Press to select “System”, then press .
4 Press to select one of the following TV
broadcast systems, then press .
B/G: For western European countries/areas
I: For the United Kingdom
D/K: For eastern European countries/areas
L: For France