Filter
Top Products
OSIM | Project: EG2L | Resolution-Width: 960 | Resolution-Height: 540 | Language: English
82/ 138 | File AQUA_Paprika_OSIM_GBAEP_090807.fm | Created at March 19, 2008 | Modified at September 29, 2009 10:07 am
Previous Next Table of Contents
Select Back
<auto-generated>Adjusting the Server Display Settings
You can select home network servers to be
displayed on the Home Menu.
Up to 10 servers can be displayed on the Home
Menu automatically.
1 Set the server to allow connections from the TV.
For details on settings on the server, refer to the
Operating Instructions supplied with the server.
2 Press HOME.
3 Press to select “Settings”.
4 Press to select “Network Settings”, then
press .
5 Select “Server Display Settings”, then press .
6 Select the server you want to display on the
Home Menu, then press .
7 Select “Yes”, then press .
If you cannot connect to your home network
The TV can check if the server is being correctly
recognised.
1 Press HOME.
2 Press to select “Settings”.
3 Press to select “Network Settings”, then
press .
4 Select “Server Diagnostics”, then press .
5 Select “Yes”, then press .
The server diagnostic starts.