Filter
Top Products
OSIM | Project: EG2L | Resolution-Width: 960 | Resolution-Height: 540 | Language: English
57/ 138 | File AQUA_Paprika_OSIM_GBAEP_090807.fm | Created at March 19, 2008 | Modified at September 29, 2009 10:07 am
Previous Next Table of Contents
Select Back
<auto-generated>Using BRAVIA Sync with Control for HDMI
After displaying the menu, you can operate the
menu screen by using , , colour
buttons, and RETURN.
- OPTIONS to display “Device Control”, then
select options from “Options” and “Content
List” to operate the equipment.
- Refer to the instruction manual of the
equipment for available control.
• If “Control for HDMI” of the TV is set to “On”,
“Control for HDMI” of the connected equipment
is also automatically switched to “On”.
To connect the equipment that is compatible with
Control for HDMI
Connect the compatible equipment and the TV with
an HDMI cable. When connecting an audio system,
be sure to also connect the DIGITAL AUDIO OUT
(OPTICAL) jack of the TV and the audio system
using an optical audio cable (39).
To make the Control for HDMI settings
The Control for HDMI settings must be set on both
the TV side and connected equipment side. See
“HDMI Set-up” (111) for the TV side settings. For
settings on the connected equipment, refer to the
operating instructions for that equipment.