Filter
Top Products
OSIM | Project: EG2L | Resolution-Width: 960 | Resolution-Height: 540 | Language: English
129/ 138 | File AQUA_Paprika_OSIM_GBAEP_090807.fm | Created at March 19, 2008 | Modified at September 29, 2009 10:07 am
Previous Next Table of Contents
Select Back
<auto-generated>Troubleshooting
Tiny black points and/or bright points appear on
the screen.
• The screen is composed of pixels. Tiny black
points and/or bright points (pixels) on the
screen do not indicate a malfunction.
The picture contours are distorted.
• Select “Standard” or “Off” in “Motionflow”
(94).
• Change the current setting of “Film Mode” to
other settings (94).
The picture is not displayed in colour.
• Select “Reset” (92).
The picture from equipment connected to the
COMPONENT IN sockets is not displayed in
colour, or is displayed in irregular colours.
• Check the connection of the COMPONENT
IN sockets and check if the sockets are firmly
seated in their respective sockets.
No picture from the connected equipment
appears on the screen.
• Turn the connected equipment on.
• Check the cable connection.
• Press to display the list of inputs, then
select the desired input.
• Correctly insert the memory card or other
storage device in the digital still camera.