Filter
Top Products
OSIM | Project: EG2L | Resolution-Width: 960 | Resolution-Height: 540 | Language: English
121/ 138 | File AQUA_Paprika_OSIM_GBAEP_090807.fm | Created at March 19, 2008 | Modified at September 29, 2009 10:07 am
Previous Next Table of Contents
Select Back
<auto-generated>Digital Set-up
Use this function DIGSETUP
To remove a digital channel:
Press . After a confirmation message
appears, press to select “Yes”, then press
.
To change the order of the digital channels:
Press , then press to select the new
position for the channel and press .
3 Press RETURN.
• Digital Manual Tuning: Tunes the digital
channels manually. This feature is available
when “Digital Auto Tuning” is set to “Antenna”.
1 Press the number buttons to enter the
channel number you want to tune, or press
.
2 When the available channels are found, press
to select the channel you want to store,
then press .
3 Press to select the channel number
where you want to store the new channel,
then press .
Repeat the above procedure to tune other
channels.
• LNA: Improves the picture quality of the
channel (noisy picture) when the broadcast
signal is very weak.