20
Chapter 2: Connecting your TV
Using the IR IN terminal
For additional control options for your home theater
system, you can connect an IR receiver/repeater control
system (not included) to the TV’s IR IN terminal.
You will need:
•IR cable
To set the IR IN mode:
1 > Settings > PREFERENCES > IR Control.
2 Press C or c to select In.
To operate the TV with this connection, point the
Toshiba TV remote control toward the front of the IR
receiver/repeater control system.
To view the HDMI device video:
Press and B or b to select the HDMI 1, HDMI 2,
HDMI 3, or HDMI 4.
Note: To program the TV remote control to operate other
devices, see p. 88.
To connect a DVI device, you will need:
•One HDMI-to-DVI adapter cable
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a
Dolby
®
Digital or 2-channel down-mixed PCM (pulse-
code modulation) signal for use with an external Dolby
Digital decoder or other external audio systems with
optical audio input.
You will need:
•Optical audio cable (Use an optical audio cable that
has the larger TosLink connector, not the smaller
mini-optical connector.)
Before controlling the audio:
•See “Selecting the optical audio output format” (- p.
60).
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may not
work properly, creating a high noise level that may
damage speakers or headphones. THIS DAMAGE IS
NOT COVERED BY YOUR WARRANTY.
• The DIGITAL AUDIO OUT terminal may not output some
digital audio sources due to copy restrictions.
• The Dolby Digital format is available in the following
situations:
- When tuned to a digital RF channel.
- When an HDMI input is used.
- When DLNA Certified products or widgets are used.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of
Dolby Laboratories.
Back of IR receiver/repeater control system
(not included)
IR cable
TV back panel
IR receiver/repeater
control system
LINE IN
Optical
Audio IN
LR
Dolby Digital decoder or other
digital audio system
TV back panel
Optical
audio
cable