Filter
Top Products
22
Chapter 2: Connecting your TV
Connecting a PC
You can view your PC’s display on the TV and hear the
sound from the TV’s speakers.
Connecting to the TV’s PC IN terminal
You will need:
•Analog RGB (15-pin) computer cable
•Analog audio cable
Before using the PC:
See “Using your PC with the TV” (- p. 49).
To use a PC:
• Set the monitor output resolution on the PC before
connecting it to the TV.
•Supported signal formats: VGA, SVGA, XGA, WXGA,
and SXGA. For signal specifications, see p. 83.
Note:
• The PC audio input terminal on the TV is shared with the
HDMI 4 and ColorStream HD2 terminal. For
configuration, see “Setting the PC audio” (- p. 49).
• Some PC models cannot be connected to this TV.
• If the PC has a compatible mini D-sub15-pin terminal, an
adapter is not required.
• Depending on the content’s title and the PC’s
specifications, some scenes may be skipped or you may
not be able to pause during multi-angle scenes.
Signal names for mini D-sub 15-pin connector
* NC=Not connected
Connection to the TV’s HDMI terminal
You will need:
If your PC has DVI terminal:
•HDMI-to-DVI adapter cable
•Analog audio cable
If your PC has an HDMI terminal:
•HDMI cable
Supported signal formats: VGA, SVGA, XGA, WXGA,
SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i
(60Hz), and 1080p (24Hz/60Hz). For signal
specifications, see p. 84.
Note:
• The edges of the picture may be hidden.
• The PC audio input terminal on the TV is shared with the
HDMI 4 and ColorStream HD2 terminal. For
configuration, see “Setting the PC audio” (- p. 49).
TV back panel
PC
PC audio
output
Analog
audio
cable
Conversion adapter
(if necessary)
Analog
RGB
computer
cable
Pin
No.
Signal
name
Pin
No.
Signal
name
Pin
No.
Signal
name
1R 6Ground11NC
2G 7Ground12NC
3B 8Ground13H-sync
4NC * 9NC 14V-sync
5 NC 10Ground15NC
TV back panel
PC
Analog
audio
cable
PC audio
output
HDMI-to-
DVI
adapter
cable