Filter
Top Products
UsingtheTV'sAdvancedFeatures103
Using the advanced picmre settings
1 From fl_ePicture menu, highlight Advanced Picture Settings, and
thenpress fl_eOK button.
2 Highlight Noise Reduction andthen press the OK button.
3 Press the A /T (arrow) buttons to select MPEG NR andthen
press the OK button.
4 Press the A/T (arrow) buttons to select High, Middle, Low, or
Off, andthen press the OK button.
DNR(Dynamic Noise Reduction)
DNR lets you soften the screen representation of a weak signal to
reduce the noise effect.
1 From the Picture menu, Nghlight Advanced Picture Settings, and
thenpress the OK button.
2 Highlight Noise Reduction and then press the OK button.
3 Press the A/T (arrow) buttons to select DNR and then press
the OK button.
4 Press the A /T (arrow) buttons to select High, Middle, Low, or
Off, and then press the OK button.
EdgeEnhancer
The Edge Enhancer feature lets you adjust the levels for your
desired picture settings and achieve a sharper picture.
1 From the Picture menu, highlight Advanced Picture Settings, and
thenpress the OK button.
2 Highlight Edge Enhancer and then press the OK button.
3 Press the A/V (arrow) buttons to select On or Off. Press the
OK button.
NOTE Thisfeaturemaynotworkproperlydependingonthecontent.