2 Setting up yourTV
Setdng the sleep dmeF
ToplaybackDiv×HDcontent:
*_**To play in Pastreverse or fast forward directions, press the 44
or _ button during playback. Each time you press the 44 or
_ button, the playback speed will change.
*_**If the content contains no chapter, this TV generates original
chapter point in 10% increments for 10 chapters in total, that
are accessible by using the Number buttons on the remote
control.
During playback, press the I,_ button to skip to the beginning of the
next chapter.
When the _ button is pressed twice in succession, it will repeat
two times of above.
If the _ button is pressed at the last chapter, the confirmation
message will appear.
If Yes is selected, playback will skip to the beginning of the next
content.
Press the _ button to skip to the beginning of the current chapter.
When the _ button is pressed twice in succession, it will skip to
the beginning of the previous chapter. If the _ button is pressed
twice continuously at the first chapter, playback of the current
content will stop and the confirmation message will appear. If Yes is
selected, playback will skip to the beginning of the previous
content.
Settingthesleeptimer
You can set the sleep timer to turn off the TV after a set length of
time (maximum of 12 hours).
To set the sleep timer using the remote control:
1 Press the SLEEP button on the remote control to set the length
of time the TV remains on until the TV turns off.
2 Repeatedly press the SLEEP button to increase the time in
10-minute increments, or press the A /T (arrow) buttons to
increase or decrease the time in 10-minute increments, to a
maximum of 12 hours.
To set the sleep timer using the on-screen menus:
1 In Timers menu, highlight Sleep Timer, and then press the
OK button.