Filter
Top Products
7
Setting z_pthe Network
| U
EasySetupusingPBC(PushbuUonconfiguration)
1 Press the MENU button.
2 Select Network > Network Setup > Wireless Setup and press
the OK button.
3 Press A/T (arrow) buttons to select Easy Setup and press the
OK button.
4 Press A/T (arrow) buttons to select PBC and thenpress the
OK button.
5 Press !v (arrow) button to select Start Scan, and thenpress the
OK button.
6 Following the on-screen instructions, push the appropriate
button on your AR
7 When a screen reporting that "Wireless configuration is
complete" appears, press the EXIT button.
To cancel searching for the AP:
*_**Press the BACK button while searching for the AR A message
appears. Press 4/1_ (arrow) buttons to select Yes, and then
press the OK button.
EasySetupusingPiN(PersonalIdenUflcationNumber)
1 Press the MENU button.
2 Select Network > Network Setup > Wireless Setup and press
the OK button.
3 Press A/T (arrow) buttons to select Easy Setup and press the
OK button.
4 Press A/T (arrow) buttons to select PIN.
5 Press T (arrow) button to select Start Scan, and thenpress the
OK button.
6 Enter the PIN displayed on this screen into your computer or
AR
7 Press A/T (arrow) buttons to select the desiredAR and then
press the OK button.
NOTE ChecktheMACaddressonthelabelorinthemanualoftheAPandselect
anAP.
8 When a screen reporting that "Wireless configuration is
complete" appears, press the EXIT button.