Filter
Top Products
To delete the custom label:
1 Open the Channel Labeling window.
2 Highlight the label to be deleted and press [].
3 Highlight Yes from the deletion confirmation
window and press @.
Setting the HDN!®audio mode
To set the HDMI audio mode:
MENU
1 Press O and open the Soundmenu.
2 Highlight Audio Setup and press @.
3 Press & or V to select H[}NJ 1 Audio and
then press 4 or _ to select the HDM[ 1 audio
mode (Auto, Digital or AnaJ0g). (Auto is the
recommended mode.) See "Connecting an HDM[
or DV[ device to the HDM[ input" (_c_ page 16).
4 Highlight [}one and press @ to save changes,
and go back to the ChanneJ Labelingwindow.
When viewing the HDM[ l input, if
digital audio from the HDMI input is
Auto available, it will be output. [f not, the
TV will automatically detect and output
analog audio from the PC Audio input.
When viewing the HDM[ 1 input,
Digital digital audio from the HDM[ input will
be output.
When viewing the HDM[ 1 input,
Analog analog audio from the PC Audio input
will be outpuL
4 To save your settings, highlight Done and press
Note: Because the PC and HDMI- 1inputs
share the same set of analog audio inputs, the
PC Audio menu setting influences the HDM! 1
Audio menu setting. If PC Audio is set to "No,"
the HDM! 1Audio setting changes to "Auto."
If PC Audio is set to "Yes," the HDMI 1 Audio
setting is set to "Digital" and is grayed out in
the menu. (Also see item 2 on page 12 and
"Setting the PC Audio" on page 44.)
27