Filter
Top Products
Displaying TV status information
To display TV status information using
RECALL:
Press _ on the remote control.
The following information will display (if applicable):
* Current input (ANT/CABLE,VIDE0, etc.)
, If ANT/CABLE is the cmrent input, either "CABLE"
(for cable TV) ol "ANT" (1\trover-the-air broadcasts).
, Channel number (if in ANT/CABLEmode)
®Channel label (if set)
®Digital signal strength indicator (bar graph in lower
right corner of box: l_r ATSC signal only)
®Stereo. Mono or SAP audio status (when HDMI input
mode, Dolby Digital or PCM)
®Video resolution
®Aspect ratio of incoming video signal (4:3 or 16:9)
®V-Chip rating status
®Game Timer (if set)
To close the RECALL screen:
Press _ again.
To display TV status information using INFO:
INFO
Press © oll the remote control.
The following additional information will display for
off air digital channels (if applicable):
®Title
®Duration
• Detailed description
Understandingthe auto poweroff
feature
The TV will automatically turn itself off after
approximately 15 minutes if it is tuned to a vacant
channel or a station that completes its broadcast for the
day. This feature functions in ANT/CABLEmode only.
Understandingthe last mode
memory feature
If the power is cut off while you are viewing the
TV, the Last Mode Memory feature automatically
turns on the TV when the power is resupplied.
Note:/f it's possible, and you will be away
from the TV for an extended period of time you
should unplug the power cord.
Note: The location of the banner can be moved
to the top or bottom of the screen by pressing &
or V while the RECALL or/NFO display is on-
screen.
51