Filter
Top Products
Soundproblems
* Check the antenna/cable connections (_ Chapter
2).
. The station may have broadcast difficulties. Try
another channel.
. The sound may be muted. Press VOLUME.
. [f you hear 11osound, try setting the MTS feature
to Stereo mode (_:_ page 39).
. [f yon are not receiving a second audio program
from a known SAP source, make sure the NTS
feature is set to SAP mode (_:_ page 39).
. [f yon hear audio that seems "incorrect" for the
program you are watching (such as music or a
foreign language), the SAP mode may be on. Set
the MTS feature to Stereo mode (_:_ page 39).
Remotecontrol problems
• Make sure the remote control is set to the correct
device mode (_:_ page 21 ).
• Remove all obstructions between the remote
control and the TV.
• The remote control batteries may be dead.
Replace the batteries (_:_ page 20).
• [f the TV still does not act as expected, use the
Reset Factory Defaults procedure (_:_ page 28).
Channeltuning proNems
• Make sure the remote control is set to the correct
device mode (_:_ page 21 ).
• The channel may have been erased from the
channel memory by the Programming channels
automaticallyfeature. Add the channel to the
channel memory (_ page 25).
• The channel may be blocked by the LOCK
feature. Unblock the channel (_ page 42).
• [f yon are unable to tune digital channels, check
the antenna configuration (_ page 24). If yon
are still unable to tune digital channels, clear all
channels from the channel list and reprogram
channels into the channel memory (_ page 24).
[f yon are still ramble to tune digital channels,
use the Reset Factory Defaults procedure (_
page 28). Also see "TV stops responding to
controls" and "Other problems" (_ page 62).
Closedcaption problems
* [f the program or video you selected is not
closed-captioned, no captions will display (_:_>
page 37).
. [f text is not available, a black rectangle may
appear. If this happens, turn off the closed
caption feature (_:_>page 37).
. A closed-caption signal may not display
correctly in the following situations: a) when
a videotape has been dubbed; b) when the
signal reception is weak; or c) when the signal
reception is nonstandard (_:_>page 37).
Ratingblocking(V-Chip)problems
• [f you forget your PIN code: While the PIN
code entering screen is displayed, press
four times within 5 seconds. The PIN code yon
previously stored will be cleared (_ page 40).
HoREGZA-L]HKoperation
* The REGZA-LINK feature is available for
Toshiba REGZA-LINK compatible devices.
. Make sure the HDM[ cables with the HDM[
Logo (H='_Tlr) are used.
. When the connected REGZA-LINK device
does not work correctly after you have changed
settings of the device, turn off your TV and
unplug the power cord, then plug and turn on
again.
. [f several devices are connected, REGZA-LINK
feature may not operate properly.
. Read the instruction manual furnished with the
connected REGZA-LINK device.
HDNI problems
For HDMI cab/os
• Make sure to use cables with the HDM[ Logo
(_-_['!| _) (_ page 13).
Nedia Player problems
* Make sure that devices are connected correctly.
. Incorrect behavior may occur with a USB HUB
connection.
. Photo files that was processed and edited by
using the PC's application software may not be
able to be viewed.
. The TV may select one format automatically and
play it when contents that support two or more
formats are played.
. Contents that PC originally recorded may not be
able to be played correctly.
56