Filter
Top Products
VOLUME and MUTE controls of Audio
Receiver
With your TV's remote control, you can adjust or
mute the sound volume of the Audio Receiver. First,
set the MODE SELECT switch on the remote control
to IV.
VOL •
" I_ v-L_adjust the volume level.
• [_ turns off the sound.
Note:
° To use this function:
_ SetSpeaker Preference to Audio Receiver in
the REGZA-LINK Setup menu.
_ Confirm that a connected REGZA-L/NK device
(such as DVD player, etc) is selected for the
Audio Receiver input soume.
° You can also use this function when the audio
receiver is connected to the TV's DIGITAL
AUDIO OUT terminal (not HDMI connection).
In this case, select a digital audio input mode
on the Audio Receive_
o These functions depend on the device
connected.
Other REGZA-LIHR®functions
When the Enable REGZA-LiNRand each item in the
REGZA-UNR Setup menu are set to On, the following
functions will be enabled.
Note: When you turn on the Audio Receiver,
change its input source, or adjust the sound
volume, the sound will be output from the audio
receiver's speakers even ff TV Speakers has
been selected. Turn the TV off and on again to
output the sound from the TVspeakers.
To set the REGZA-LINK ® Setup:
1 From the Setup menu, highlight REGZA-LiRK
Setup and press @_.
2 Press A or V to highlight Enable REGZA-LNK
3 Press "9 or _ to select On.
Note: If you select EnableREGZA-LINgOff, the
other items will be grayed out.
4' Press A or V to highlight the REGZA-LJNRSetup
item you want to use, and press 4 or _ to select
On or desired mode.
* TV Auto [nput Switch: On/Off
* TV Auto Power: On/Off
* Device Auto Standby: On/Off
° Speaker Preference: TV Speakers/Audio Receiver
5 To save the new settings, highlight Done and press
@. To revert to the factory defaults, highlight
Reset and press @.
If a connected HDMI device stal_s
TV Auto playing video or audio,the TV will
[nput Switch automatically switch to theappropriate
HDMI input.
TV Auto If a REGZA-LINK device isturned on,
Power the TV turnson automatically.
If theTV is turuexloff'the TV will send
Device Auto
a message to turn off'all of the REGZA-
Standby LINK devicescom_ectedtothe TV.
Speaker
Preference
From this item, youcan set your audio
output preference to the TV speakers
or the audio receiver speakers. When
this item is set to Audio Receiver.
the TV remote can be used to adjust
or mute the volmne of the audio.
This item will be grayed out unless
a REGZA-LINK compatible audio
receiver is connected.
5O