Filter
Top Products
5 Press _ to select 0U. When the control panel
is locked and any button oll the control panel
(except POWER) is pressed, the message "NOT
AVAILABLE" appears.
Note: The screen is disrupted momentarily
when adjusting the PC settings. This is not a
sign of malfunction.
To unlock the control panel:
Select 0If in step 5 above, or press and hold the
V0[.[JMF - button on the TV control panel for about
10 seconds until the volume icon appears.
Usingthe PCsettingsfeature
You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC tIN
terminal, you can use the PC Settings feature to
make adjustments to the image. [f the edges of the
picture are cut off, readjust the Horizontal Position
and Vertical Position. If the picture is affected by
interference, readjust the Clock Phase and Sampliug
Clock.
To adjust the PC settings:
1 Repeatedly press @ to select PC input mode
(_:_ "Selecting the video input source to view"
page 29).
2 MENU
Press O and open the Setup menu,
3 Highlight PC Settingsand press @.
Note: lf a PC is not connected or there is no
pc input signal this feature will be grayed
out in the Setup menu.
4' Press & or V to highlight the item you want to
adjust.
5 Press @ or _ to make the appropriate
adjustments.
Horizontal Moves the picture left/right.
Position The adjustment range is within _+50from
centeL 'i_
Vertical Moves the picture up/down.
Position The adjustment range is within _+10fi'om
center. 'i_
Helps to reduce noise and sharpen the
Clock picture.
Phase The adjustment range is within _+16fi'om
center. 'i_
Helps to reduce noise and minimize
Sampling periodic vertical stripes oil the screen.
Clock The adjustment range is within _+10from
center.*
Auto Highlight this item then press @
Adjust to get all optimum adjustment
automatically.
* The default settings may vary depending on
the input signal format.
Setting the PC Audio
This function allows you to output or mute the sound
from your PC when connecting using the PC IN
terminal and all analog RGB cable. (_>" page 18)
To set the PC Audio:
MENU
1 Press O and open the Sound menu.
Highlight AUdiO Setup and press @.
Press A or V to select PC Audio and then press
or _ to select N0 or Yes.
Yes: When viewing the PC input, the audio from
the PC Audio input call be heard.
N0: When viewing the PC input, there will be no
audio.
Note: Because the PC and HDMI-1 inputs
share the same set of analog audio inputs,
the PC Audio menu setting influences the
HDMI 1Audio menu setting. If PC Audio
(comi_,_,d)
44