Filter
Top Products
6 F 3 B 0 3 6 4
161
Wizard for TOSHIBA
Registration by the ladder program and registration by DeviceNet Wizard for TOSHIBA must
not exist together (The example:The node parameter is registerd by the ladder program and the
slave device parameter is registerd by DeviceNet Wizard for TOSHIBA).
If registration by both is intermingled, rewriting of the contents of registration etc. occurs and
there is a possibility that the allocation of slave device data to input/output data area may become
impossible.
D. Problem in old model DN211
The following restriction which was in old model DN211 is solved in DN211A.
Using the polling mode slave device which transmission data size from master device is "0
bytes", when that slave device fails to communicate with DN211 due to some reason (power of
that slave device side turned OFF, connector removed, etc.), DN211 cannot identify that slave
device being malfunctioned.
Even after the cause of the failure is solved, no communication between that slave device and
DN211 can be resumed.
E. DeviceNet Wizard for TOSHIBA
DeviceNet Wizard for TOSHIBA is software which works on Microsoft Windows
95/98/NT4.0. The user can keep handy with the registration of the slave parameter to the master
module and the allocation of the slave data to master module input/output area by graphical user
interface like the figure below.
Please buy DeviceNet Wizard for TOSHIBA from our company. Product code:TDW33E2SS