Filter
Top Products
11
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 42/50HPX95 *web 213:276
___________
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
TV back panel connections
For an explanation of cable types, see page 13.
1
VIDEO 1 IN
and
VIDEO 2 IN
— Two sets of standard
(composite) video and standard audio inputs plus optional
S-video inputs for connecting devices with composite video
or S-video output.
Note: Standard (composite) video and S-video cables carry
only video information; separate audio cables are required for a
complete connection.
2
ColorStream
®
HD-1
and
ColorStream
®
HD-2
— Two sets
of ColorStream
®
high-definition component video and
standard stereo audio inputs for connecting devices with
component video output, such as a Toshiba DVD player
with ColorStream
®
. See pages 17 and 19.
Note: Component video cables carry only video information;
separate audio cables are required for a complete connection.
3
A/V OUT
— Standard composite video and analog audio
outputs for connecting a VCR for editing and dubbing. See
page 20 for details.
4
VARIABLE AUDIO OUT
— Standard analog audio outputs
for connecting an analog amplifier with external speakers.
See page 24.
5
TheaterNet
™
(IR) OUT
— For controlling infrared remote-
controlled devices through the TV. You can connect up to
two devices with either one of the enclosed IR blaster cables,
and then control the devices using the TV’s IR pass-through
or TheaterNet
™
(on-screen device control) features. See
pages 22 and 51.
TheaterNet™ (IR) IN
— For connecting to IR OUT on
other devices. See page 23.
6
HDMI AUDIO IN
— For use when connecting a DVI device
with analog audio output to the HDMI input. See page 21.
Also see item 8 on the next page.
Chapter 2: Connecting your TV
5
12
43
6
Power cord*
Wall outlet
120V AC 60Hz
TV back
Before connecting the external device to
the TV, remove the applicable panel cover
by squeezing the tabs in the direction of
the arrow (%) and pulling the cover.
* The power cord supplied with this product is to be used in United States and Canada only. If this product is
used in another country, use a power cord which confirms to the law or regulations of that country.
Do not remove the noise filter from the power cord. The noise filter is to reduce the interference in image or
sound of other electronic equipment.
(Continued on next page)
#01E_010-013_4250HPX95 05.9.12, 10:16 PM11
Black