Filter
Top Products
31
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 42/50HPX95 *web 213:276
Using the remote control
3
Note: The error message “Not
Available” will appear if you press a
key for a function that is not available
The buttons used for operating the TV only are described here. For a
complete list of the remote control’s functions, see the remote control
functional key chart on pages 34–35.
For a list of the buttons that operate the TV Guide On Screen
™
system, see
page 59.
POWER
turns the TV on and off. Press POWER to turn on the TV. The red
LED indicator on the TV will be illuminated. Press POWER again to turn
off the TV.
SLEEP
accesses the sleep timer (page 94).
LIGHT
The first press of the LIGHT button lights the keypad and turns on
the Illumination mode. With the Illumination mode on, pressing any key
lights the keypad for 5 seconds (10 seconds if you’re in programming
mode). Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
Channel Numbers (0–9, –/100)
directly tune channels. The “–” button is used
to tune digital channels (page 76) or to display the favorite channel list
(page 49).
INPUT
selects the video input source (page 72).
MODE
cycles through the six remote control device modes: TV, CBL/SAT,
VCR/PVR, DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds (page 33).
PIC SIZE
cycles through the five pictures sizes: Natural, TheaterWide 1/2/3,
and Full (page 77).
TheaterNet™ DEVICE
displays a list of available TheaterNet devices (page 50).
TheaterNet™ CTRL
accesses the on-screen IR device control icons (page 51).
MENU
accesses the main TV menu system (pages 40 and 41) or opens a
menu in the TV Guide On Screen
™
system (Chapter 7).
TV GUIDE
opens the TV Guide On Screen
™
system (Chapter 7).
INFO
provides detailed information on highlighted items in the TV Guide
On Screen
™
system (Chapter 7).
ENTER
activates highlighted items in the main menu system and the
TV Guide On Screen
™
system.
Arrow buttons (yz x •)
When a menu is on-screen, these buttons select or
adjust programming menus. (Also see
x / • on the next page.)
CH yz
cycles through programmed channels when no menu is on-screen
(page 47) and functions as page up/down when a menu is on-screen or
when the TV Guide On Screen
™
system is open (Chapter 7).
VOL yz
adjusts the volume level.
EXIT
closes on-screen menus and the TV Guide On Screen
™
system.
Learning about the remote control
(Continued on next page)
#01E_031-039_4250HPX95 05.9.12, 11:47 PM31
Black