Filter
Top Products
72
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 42/50HPX95 *web 213:276
Using the TV’s features
To select the video input source to view:
1. Press INPUT on the remote control or TV/VIDEO on the
TV side panel.
2. Press 0–9 to select the input source you want to view, which
will depend on the input terminals you used to connect
your devices (see Chapter 2).
The current signal source displays in the top right corner of
the Input Selection screen.
Input Selection
ANT 1
ANT 1ANT 1
Video 1
Video 2
Video 3
ColorStream HD1
ColorStream HD2
HDMI 1
PC
ANT 2
-/ to Select
INPUT
0
0
1
2
3
4
5
6
HDMI 2
7
8
9
9
Note:
•When the Input Selection screen is open, you also can use the yz
buttons on the remote control (or the CHANNEL yz buttons on
the side panel) to change the input.
•You can repeatedly press INPUT on the remote control or
TV/VIDEO on the TV side panel to change the input.
•To select an IEEE1394 input source, press the TheaterNet DEVICE
button on the remote control (see page 31 and 51).
• If an IEEE1394 device is the current input, it will appear at the
bottom of the Input Selection list; however, it will not display in the
list if you change the input source.
•You can label the video input sources according to the specific
devices you have connected to the TV (see “Labeling the video
input sources” on the next page).
•The source can be “hidden.” See page 73 for details.
INPUT
y
z
Selecting the video input source to view
Numbers
Remote control
8
TV/VIDEO
TV side panel
CHANNEL
yz
#01E_072-083_4250HPX95 05.9.12, 10:20 PM72
Black