Filter
Top Products
23
Chapter 2: Connecting your TV
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 42/50HPX95 *web 213:276
Connecting a device to the IR blaster (continued)
Using the TheaterNet
™
IN:
For additional control options for your home theater system, you
can connect an IR receiver/repeater (not included) or a home theater
control system (not included) to the TV’s TheaterNet IN terminal.*
Contact your home theater electronics dealer for details about home
theater control systems.
You will need:
one IR cable
With this connection, point the
Toshiba TV remote control at
the front of the IR receiver/
repeater or home theater control
system to operate the TV.
IR receiver/repeater
or home theater
control system
For additional control options for
your home theater system, set up
the TheaterNet on-screen device
control feature. You can use this
feature to control many IR
remote-controlled devices and
IEEE1394 devices using the on-
screen control icons.
See pages 50–54 for details on setting
up and using TheaterNet.
See pages 25–27 for details on
connecting IEEE1394 devices.
TheaterNet
™
on-screen device control
Note: The TheaterNet on-screen icons are the only device functions
available when the icons are on-screen. To access other device
functions, close the TheaterNet icon window.
ENTER
EXITTOP MENU
Toshiba Video 3
* The TheaterNet OUT function has been verified for use with Toshiba
infrared-controlled devices. The TheaterNet IN function has been verified
for use with SmarTouch™ STS/STS-C wireless RF
control systems. Due to the wide variation in remote control operation
among manufacturers, these functions may or may not operate with other
brands.
SmarTouch is a trademark of Crestron Electronics, Inc. (www.crestron.com).
IN
OUT
Back of IR receiver/repeater or home
theater control system* (not included)
TV back panel
#01E_014-030_4250HPX95 05.9.12, 10:17 PM23
Black