Filter
Top Products
22
Chapter 2: Connecting your TV
Connecting a PC
You can watch your PC’s display on the TV and hear
the sound from the TV’s speakers.
Connecting to the TV’s PC IN terminal
You will need:
•Analog RGB (15-pin) computer cable
•PC audio cable
Before using the PC:
See “Using your PC with the TV” (- p. 46).
To use a PC:
• Set the monitor output resolution on the PC before
connecting it to the TV.
•Supported signal formats: VGA, SVGA, XGA, WXGA,
SXGA. For signal specifications, see p. 85.
Note:
• The PC audio input terminal on the TV is shared with the
HDMI 4 and ColorStream HD2 terminal. To configure for
use, see “Setting the PC audio” (- p. 46).
• Some PC models cannot be connected to this TV.
• If the PC has a compatible mini D-sub15-pin terminal, an
adapter is not required.
• Depending on the DVD’s title and the PC’s
specifications, some scenes may be skipped or you may
not be able to pause during multi-angle scenes.
Signal names for mini D-sub 15-pin connector
* NC=Not connected
Connection to the TV’s HDMI terminal
You will need:
If your PC has no HDMI terminal:
•Adapter cable
•Analog audio cable
If your PC has HDMI or DVI terminal:
•HDMI cable or HDMI-to-DVI adapter cable
Supported signal formats: VGA, SVGA, XGA, WXGA,
SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i
(60Hz), 1080p (24Hz/60Hz). For signal specifications,
see p. 86.
Note:
• The edges of the images may be hidden.
• The PC audio input terminal on the TV is shared with the
HDMI 4 and ColorStream HD2 terminal. To configure for
use, see “Setting the PC Audio” (- p. 46).
TV back panel
PC
PC audio
output
PC audio
cable
Conversion adapter
(if necessary)
Analog
RGB
computer
cable
Side view
Pin
No.
Signal
name
Pin
No.
Signal
name
Pin
No.
Signal
name
1R 6Ground11NC
2G 7Ground12NC
3B 8Ground13H-sync
4NC * 9NC 14V-sync
5NC 10Ground15NC
TV back panel
PC
PC audio
cable
PC audio
output
HDMI-to-
DVI
adapter
cable
Side view
WX800U_EN.pdf 22 2010/08/11 10:14:50