Filter
Top Products
85
Chapter 10: Appendix
Acceptable signal formats for PC IN and HDMI terminals
PC IN signal formats
Note:
• The PC IN on this TV only accepts signal formats which are compliant with VESA-DMT as in the table below. Since some
PCs’ input signals which are different from the resolution and frequency described in the table below, these phenomena
occur: incorrect display, false format detection, picture position failure, blur, or judder. In this case, set the monitor output
format on your PC to conform to any signals in the table below.
• The signals whose vertical frequency are 56 Hz,70 Hz, 72 Hz, or 75 Hz are converted to 60 Hz signal.
• When you connect a PC to this TV, it is recommended to set the refresh rate of your PC to 60 Hz.
• The PC IN on this TV does not accept the Sync on Green, Composite Sync and Interlace signals.
Format Resolution V. Frequency H. Frequency Pixel Clock Frequency VESA Standard (DMT)
VGA 640 × 480 59.940/60 Hz 31.469/31.500 kHz 25.175/25.200 MHz
72.809 Hz 37.861 kHz 31.500 MHz
75.000 Hz 37.500 kHz 31.500 MHz
SVGA 800 × 600 56.250 Hz 35.156 kHz 36.000 MHz
60.317 Hz 37.879 kHz 40.000 MHz
72.188 Hz 48.077 kHz 50.000 MHz
75.000 Hz 46.875 kHz 49.500 MHz
XGA 1024 × 768 60.004 Hz 48.363 kHz 65.000 MHz
70.069 Hz 56.476 kHz 75.000 MHz
75.029 Hz 60.023 kHz 78.750 MHz
WXGA 1280 × 768 59.995 Hz 47.396 kHz 68.250 MHz
59.870 Hz 47.776 kHz 79.500 MHz
74.893 Hz 60.289 kHz 102.250 MHz
1360 × 768 60.015 Hz 47.712 kHz 85.500 MHz
SXGA 1280 × 1024 60.020 Hz 63.981 kHz 108.000 MHz
75.025 Hz 79.976 kHz 135.000 MHz
WX800U_EN.pdf 85 2010/08/11 10:14:54