Filter
Top Products
74
Chapter 8: Advanced features
Using Media Player with DLNA CERTIFIED
™
Server
You need to configure a home network before using this
feature (- p. 23).
1 Y > APPLICATIONS > Media Player > .
2 Press B or b to select Photo, Movie, or Music. Press
. The thumbnail (for Photo) or list of files (for
Movie and Music) appear.
3 If there is more than one media server on the
network, a list of all media servers will be
displayed. Select the server you want to use, and
press .
Press B or b to select DMS if the selection window
is displayed.
To select a file in the list of contents:
1 Press B, b, C or c to select a file or folder.
2 Press to move to the next layer, or press to
return to the previous layer.
To close the Media Player:
Press O. The TV will return to the last-viewed channel
or video input.
To display the device information:
1 Press to open the Quick menu in list mode or
Multi View mode.
2 Press B or b to select Device Information.
Setting DLNA CERTIFIED
™
Server waking up
You only need to complete the Media Server Setup if
you wish to use the "Wake-on-LAN" feature.
1 Y > APPLICATIONS > Media Player > .
2 Press B or b to select Setup. Press .
3 Press B or b to select Media Server Setup. Press
. The list that contains the currently active DMSs
and the registered DMSs appears.
4 Press B or b to select the desired device. Press .
The box is selected. To clear the selection, press .
5 Press c to select Done. Press .
Note:
• The setting is not saved when is pressed before
Done is pressed.
• Up to 8 DMSs can be selected.
• Even if the device checked is powered off, it will be
displayed but grayed out in the Select Device window.
When is pressed on a highlighted grayed out item, a
confirmation of Wake-on-LAN is displayed. The TV tries
to wake up the DMS if Yes is pressed. The Server will
start if it supports Wake-on-LAN feature.
• Depending on the hardware/software configuration of
the Media Server, it may not start even if Wake-on-LAN is
sent.
• When some DMSs are connected, it may take time until
the list is displayed. The list may be refreshed by the
following operation.
- The device selection window is closed once and it is
displayed again.
- The RED button is pressed.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
WX800U_EN.pdf 74 2010/08/11 10:14:53