Filter
Top Products
46
Chapter 6: Basic features
Using your PC with the TV
Adjusting the image
If the edges of the picture are hidden, readjust the
Horizontal Position and Vertical Position. If the
picture is affected by interference, readjust the Clock
Phase and Sampling Clock.
1 Select PC input mode (- “Selecting the video input
to view” on p. 38).
2 Y > PREFERENCES > Display Settings > .
3 Press B or b to select PC Settings. Press .
Note: If a PC is not connected or there is no PC input
signal, this menu will be not available.
4 Press B or b to select the item.
5 Press C or c to make adjustments.
Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of
malfunction.
* The default settings and /or adjustment ranges vary
depending on the input signal format.
To reset PC Settings:
Select Reset. Press .
Setting the PC audio
You can output sound from your PC when connecting
using the AUDIO IN terminal and PC audio cable.
1 Y > PREFERENCES > AV Connection > .
2 Press B or b to select Side Shared Audio.
3 Press C or c to select PC.
Note:
• To select PC, set Shared PC Input to PC.
• Setting Side Shared Audio to PC forces HDMI 4 Audio to
Digital mode.
Setting the timer to turn on the TV
You can set the on timer to turn on the TV to a preset
channel or input at a preset time.
To activate the timer:
1 Y > APPLICATIONS > On Timer > .
2 Press B or b to select Enable On Timer.
3 Press C or c to select On.
Note: If the Enable On Timer is set to Off, other menus
under On Timer cannot be changed.
To set the timer:
1 Y > APPLICATIONS > On Timer > .
2 Set these options to your preferences:
3 Select Done. Press .
Note:
• When the On Timer LED is set to On, the LED lights to
green (- “LED indications” on p. 83).
• If you do not operate the TV for 1 hour after it is powered
on by the On Timer feature, the TV turns off.
To cancel the timer:
1 Y > APPLICATIONS > On Timer > .
2 Press B or b to select Enable On Timer.
3 Press C or c to select Off.
Mode Description Adjustment range
Horizontal
Position
Moves the picture
left/right.
within ±10 from
center.*
Vertical
Position
Moves the picture
up/down.
within ±10 from
center.*
Clock Phase
Helps to reduce
noise and sharpen
the picture.
within ±15 from
center.
Sampling
Clock
Helps to reduce
noise and minimize
periodic vertical
stripes on the
screen.
within ±5 from
center.
OK
OK
OK
OK
Item Description
On Timer LED
A state of On Timer LED while On
Timer is set to On.
On: Turns on the LED.
Off: Turns off the LED.
Input Video input source.
Channel Channel to view.
Volume Volume level.
Time until
Power On
Amount of time from now when you
want the TV to turn on.
minimum= 00:10, maximum= 12:00
•
Press C or c.
• Press the number buttons.
OK
OK
OK
OK
WX800U_EN.pdf 46 2010/08/11 10:14:52