Filter
Top Products
36
Chapter 6: Basic features
Tuning channels
Setting the Channel Tuning Mode
You can select how tuning is handled for analog and
digital channels when the TV is in Antenna mode.
Note: To use this feature, ANT/CABLE In must be set to
Antenna (- p. 29).
1 Y > SETUP > TV Settings > .
2 Press B or b to highlight Channel Tuning Mode.
3 Press C or c to select a mode. Press O.
Note: The Channel Options screen and the Channel
Browser ANT/CABLE List update when you change the
mode. The History List clears.
Tuning to the next programmed
channel
Press < or , on the remote control or TV control panel.
Note: This feature does not work unless you store
channels in the TV’s channel memory (- p. 29).
Tuning to a specific channel
(programmed or unprogrammed)
Using the Channel Browser
™
The Channel Browser
™
is a helpful navigational
interface for all of your channels and inputs.
Features:
•Navigate the contents of all of your inputs.
•Keep a history of the last 32 channels or inputs
viewed.
•Quickly surf and tune your recently viewed channels/
inputs from the Channel Browser
™
History List.
•Surf via Browse mode (to immediately tune channels
as you highlight them in the Channel Browser
™
) or
Select mode (to surf channels in the
Channel Browser
™
before you select one to tune).
•Quickly change inputs from the Inputs List.
•Quickly select REGZA-LINK
®
devices from the
REGZA-LINK List.
To set up the Channel Browser
™
:
1 Y > PREFERENCES > Channel Browser Setup
> .
2 Press b or B to highlight Navigation.
3 Press C or c to select Select Mode or Browser
Mode.
4 Select a list.
•History List
•ANT/CABLE List
• Inputs List
•REGZA-LINK List
Note:
•History List will be cleared every time the TV is
powered off.
•REGZA-LINK List will be automatically not available
and set to off when Enable REGZA-LINK is set to Off
(- Page 44).
5 Select On or Off.
6 To return to factory defaults, highlight Reset and
press .
To open the Channel Browser
™
:
•Y > APPLICATIONS > Channel Browser > .
or
•Press , and select Channel Browser.
Mode Description
Standard
You can tune both analog and digital
channels normally.
Auto
(default)
Digital channels have priority when
manually entering a channel number
using the 0-9 buttons on the remote. To
tune analog channels, use < / , if
available.
Digital You can only tune digital channels.
Channel Description
Analog
Press the 0–9 buttons on the remote
control. (For example, to select
channel 125, press 1, 2, 5.) Press .
Digital
Press the 0–9 buttons on the remote
control to enter the major channel
number. Press the dash (=) button.
Enter the sub-channel number. (For
example, to select digital channel 125-
1, press 1, 2, 5, –, 1.) Press .
OK
OK
OK
OK
OK
OK
WX800U_EN.pdf 36 2010/08/11 10:14:51