Toshiba WX800U Flat Panel Television User Manual


 
20
Chapter 2: Connecting your TV
Using the IR IN terminal
For additional control options for your home theater
system, you can connect an IR receiver/repeater control
system (not included) to the TV’s IR IN terminal.
You will need:
•IR cable
To set the IR IN mode:
1 Y > PREFERENCES > IR Control.
2 Press C or c to select IN.
To operate the TV with this connection, point the
Toshiba TV remote control toward the front of the IR
receiver/repeater control system.
To view the HDMI device video:
Press + and B or b to select the HDMI 1, HDMI 2,
HDMI 3 or HDMI 4.
Note: To program the TV remote control to operate other
devices, see p. 91.
To connect a DVI device, you will need:
•One HDMI-to-DVI adapter cable
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a
Dolby
®
Digital or 2-channel down-mixed PCM (pulse-
code modulation) signal for use with an external Dolby
Digital decoder or other external audio system with
optical audio input.
You will need:
•Optical audio cable (Use an optical audio cable that
has the larger TosLink connector, not the smaller
mini-optical connector.)
Before controlling the audio:
•See “Selecting the optical audio output format” (- p.
58).
Note:
Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may not
work properly, creating a high noise level that may
damage speakers or headphones. THIS DAMAGE IS
NOT COVERED BY YOUR WARRANTY.
The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
The Dolby Digital format is available in the following
situations:
- When tuned to a digital RF channel.
- When DLNA Certified products or VUDU is used.
Manufactured under license from Dolby Laboratories.
Dolby, and the double-D symbol are trademarks of Dolby
Laboratories.
Back of IR receiver/repeater control system
(not included)
IR cable
TV back panel
IR receiver/repeater
control system
LINE IN
Optical
Audio IN
LR
Dolby Digital decoder or other
digital audio system
TV back panel
Optical
audio
cable
WX800U_EN.pdf 20 2010/08/11 10:14:50