Filter
Top Products
42
Chapter 6: Basic features
Locking specific channels
A channel that is configured as Locked cannot be
viewed unless the PIN code is entered first (- “Setting
the PIN code” on p. 39).
1 Y > SETUP > TV Settings > .
2 Press B or b to select Channel Options. Press .
The list of channels appears.
3 Press c and then B or b to select a channel in the
lock column, then press .
4 You must enter your PIN code to access locked
channels.
Note: If the PIN code is not yet set, a warning appears.
5 The box is selected. To clear the selection, press .
Locking video input
You can lock video inputs and channels 3 and 4. You
cannot view the input sources or channels until you
unlock the inputs by entering the PIN code.
1 Y > PREFERENCES > Parental Control and
Locks > .
2 Enter your 4-digit PIN code.
3 Press B or b to highlight Input Lock.
4 Press C or c to select Video, Video+ or Off.
Setting a time limit for games
You can use the GameTimer
®
to set a time limit for
playing a video game. When the time expires, the TV
locks all external inputs.
1 Y > PREFERENCES > Parental Control and
Locks > .
2 Enter your 4-digit PIN code.
3 Press B or b to select GameTimer.
4 Press C or c to select 30, 60, 90, or 120 minutes.
5 To cancel the timer, select Off.
To deactivate the Input Lock once the GameTimer
®
has
activated it:
Set the Input Lock to Off (- “Locking video input” on
p. 42).
Note:
• A message appears when 10 minutes, 3 minutes, and 1
minute remain.
• If the TV loses power with time remaining, the TV will
enter Input Lock mode when power is restored (as if the
GameTimer had been activated). You must deactivate
the Input Lock (- “Locking video input”).
Locking the control panel
You can lock the control panel to prevent your settings
from being changed accidentally (by children, for
example). When Panel Lock is set to On, none of the
controls on the control panel operate except POWER.
1 Y > PREFERENCES > Parental Control and
Locks > .
2 Enter your 4-digit PIN code.
3 Press B or b to select Panel Lock.
4 Press C or c to select On.
Note: When Panel Lock is set to On, “Not Available”
screen appears when the buttons on the TV control
panel are pressed. If the POWER button is pressed,
the TV turns off and you must use the remote control to
turn it on.
To unlock the control panel:
Select Off in step 4 above.
Mode Description
Video
Locks Video 1, Video 2, ColorStream HD1,
ColorStream HD2, HDMI 1, HDMI 2, HDMI 3,
HDMI 4 and PC.
Video
+
Locks Video 1, Video 2, ColorStream HD1,
ColorStream HD2, HDMI 1, HDMI 2, HDMI 3,
HDMI 4, PC and channels 3 and 4.
• Select Video+ if you play video tapes via the
ANT/CABLE input.
Off Unlocks all video inputs and channels 3 and 4.
OK
OK
Ch. Type
Channel Options
DTV
ATV
DTV
ATV
ATV
ATV
ATV
ATV
6
5-1
6-1
8
9
10
11
12
OK
OK
OK
OK
OK
WX800U_EN.pdf 42 2010/08/11 10:14:52