Filter
Top Products
www.vxitech.com
CT-400 Introduction 17
POWER SPECIFICATIONS
POWER
Available
Useable
1630 W
1000 W
DC SUPPLY VOLTAGE
A total of 1000 W may be supplied to the modules with the following
maximum currents:
Voltage Peak Current (I
MP
) Dynamic Current (I
MD
)
+5 V 80 A 15 A
-5.2 V 60 A 10 A
-2 V 30 A 5 A
+12 V 17 A 3 A
-12 V 17 A 3 A
+24 V 12 A 4 A
-24 V 12 A 4 A
OUTPUT VOLTAGE
Voltage Allowed Variation
Ripple/Noise
DC Load
Induced Ripple
Noise
+5 V +0.25 V / -0.125 V 50 mV 50 mV
-5.2 V -0.26 V / +0.125 V 50 mV 50 mV
-2 V -0.10 V / +0.72 V 50 mV 50 mV
+12 V +0.60 V / +0.36 V 50 mV 50 mV
-12 V -0.60 V / +0.36 V 50 mV 50 mV
+24 V +1.20 V / -0.72 V 150 mV 150 mV
-24 V -1.20 V / +0.74 V 150 mV 150 mV
POWER INPUT
Input Voltage
Nominal AC
Frequency
Inrush Current
Input Power
Input Leakage
Input Harmonics
Fuse
90 V– 250 V Operation
207 V– 250 V Operation
100 V ac minimum, 240 V ac maximum
47 Hz - 63 Hz (47 Hz - 440 Hz with increased leakage current and reduced PFC)
< 70 A (cold start or after 1 minute cool down)
1000 W max
< 1.24 MA @ 264 V ac, 53 Hz
Meets EN61000-3-2
15 A, 250 V, slow blow
10 A, 250 V, slow blow
PERIODIC AND RANDOM DEVIATIONS
±24 V
All Others
150 mV
P-P
50 mV
P-P
AUXILIARY DC OUTPUTS
1.5 A each at all seven supply voltages (fused/self-healing)
POWER SUPPLY
UL, CSA, TUV approved
Shout circuit, over-voltage, reverse voltage and thermal shutdown protection