Filter
Top Products
VXI Technology, Inc.
54 CT-400 Service Information
POWER SUPPLY REPLACEMENT PROCEDURE
In the event that the cooling fans or power supply must be replaced, they are contained in a single,
easy to remove module. Replacement of the power supply can be accomplished as follows:
1) Power off the mainframe and remove the power cord.
2) Locate four thumbscrews on the rear of the mainframe and loosen all four.
3) Locate two handles on the power supply and firmly pull the module straight back and
remove.
4) Locate the replacement power supply module and install it into the mainframe.
5) Seat the power supply module firmly in place and finger tighten the four thumbscrews.
6) Verify that the front panel power switch is in the off position and reattach the power cord.
Before removing the power supply unit, insure that the mainframe is in a secure location
and will not tip. Service should only be performed by trained personnel.