Filter
Top Products
www.vxitech.com
CT-400 Introduction 19
CT-400 OPTIONS
OPTIONS
ADJUSTABLE RACK MOUNT FLANGES WITH HANDLES
OPTION 100
These allow the mainframe to be accommodated into any depth rack - either
recessed in the rack up to 10 inches (25.4 cm) or extended out from the rack up
to 5 inches (12.7 cm).
VXIPLUG&PLAY RACK MOUNT KIT
OPTION 101
This allows the CT-400 to be used with VXIplug&play adapters and interfaces.
RACK MOUNT SLIDES
OPTION 102
Mounts the CT-400 in the rack while allowing access by sliding the unit.
TRANSPARENT FRONT DOOR
OPTION 103
Protects the instrumentation and cabling while allowing viewing of the VXIbus
instrument annunciators.
HINGED CUSTOM FRONT PANEL
OPTION 104
A customizable front panel is available that hinges down and mounts to the
front of the CT-400. This option allows custom connectors and small interface
adapters to be mounted directly to the front of the VXIbus mainframe; reducing
cable lengths and improving signal integrity (see
Figure 1-9 for an example).
1U CABLE TRAY
OPTION 105
A 1U Cable tray that allows access between the front and rear of the mainframe
and other instruments within the rack.
2U CABLE TRAY
OPTION 106
A 2U Cable tray that allows access between the front and rear of the mainframe
and other instruments within the rack.
BACK PLANE SHIELDS
OPTION 107
Backplane shields improve EMI/RFI performance.
INTERMODULE SHIELDS (12)
OPTION 108
Intermodule shields improve EMI/RFI performance.