Filter
Top Products
PAGE 22
Auto Program (Channel Search)
With the optional Installer remote control in hand and press
the POWER button to turn the TV on.
Press the MENU button and then use the ADJ D or E button
to highlight the Channel menu and press the OK (Enter)
button.
Press the OK (Enter) button to highlight Auto program.
Press the OK (Enter) button to start the channel search.
After finding all available channels, a display appears
briefly showing the number of analog and digital channels
found.
When finished, press MENU repeatedly to remove the menus.
1
2
3
4
5
Use Auto Program to automatically find and store all of the channels
available in the selected Tuning Band.
*Notes: Tuning Band must be set before doing the channel search. See Installer
menu item 003 Band/AFC. Default setting is 1, for CATV. When Auto Program is
run, any assigned channel labels are automatically removed.
Auto Program finds channels being received
by the TV’s analog and digital tuners.
Cable will not work unless you subscribe to
a cable service.
Antenna
Auto Program G
Channel Label
Channel List
Fine Tune Auto
Signal Strength
--:-- --
--. -- ----
Antenna
Auto Program
Channel Label
Channel List
Fine Tune
Signal Strength
--:-- --
--. -- ----
Antenna
Auto Program
Channel Label
Channel List
Fine Tune
Signal Strength
--:-- --
--. -- ----
Press OK to Search
Yes
DEMove OK Select MENU Back
F G Move OK Select MENU Back
MENU Back